dtrig

dtrig is a delta-time trigger, used for creating trigger signals in terms of delta times, or the amount of time between two trigger signals. Delta times are read from an f-table.

dtrig takes in the following arguments:

• trigger: this is a trigger signal that will trigger the sequence of de delta values. Can be used for restarting the sequence
• loop: turns looping the trigger values on or off 1=on, 0=off
• delay: amount of time (in seconds) to delay the triggers
• scale: value to scale the d-trig signals by. For instance, to double the time, use "2", to half it, use "0.5". "1" is normal.
• table: name of the table containing the delta values.

The following example using dtrig to control an envelope generator.

 # delta times: 100ms and 500 ms
 _delta "0.1 0.5" gen_vals
 
 # dtrig. "tick" is used to start it looping
 tick 1 0 1 _delta dtrig
 # dtrig feeds into an envelope generator...
 0.001 0.001 0.1 tenvx 
 # and then that is multiplied by a sine wave
 1000 0.5 sine *